GPH 114

ready for use incl. pH-electrode type GE 114 and battery

Specification:

Measuring range: 0.00 ... 14.00 pH with pH-electrode GE 114
Resolution: 0,01 pH
Accuracy (device): ± 0.02 pH ± 1 digit (at nominal temperature 25 °C)
Working conditions: 0 ... 45 °C; 0 ... 80 % r.F. (non condensing)
Storage temperature: -20 ... 70 °C
Connection: BNC bayonet
pH-electrode: GE 114 (standard electrode), combined measuring and reference electrode with gel-electrolyte. Measuring range: 0 to 14 pH, temperature 0 ... 90 °C, conductivity >200 µS/cm
EMV: The device corresponds to the essential protection ratings established in the Regulations oft he Council fort he Approximation of Legislation for the member countries regarding electromagnetic compatibility (2004/108/EG). Additional error <1 br="">scope of supply: GPH 114, GE 114 pH-electrode, battery, Manual

 

 

GE 171 S7
Measuring range: 0 ... 14 pH, 0 ... 140 °C
Conductivity: > 100 µS / cm
Pressure resistant: 10 bar 
Electrolyte: gel electrolyte
Diaphragm: 2 x ceramic
Thread: PG 13.5
Electrode shaft: glass, Ø 12 mm x 120 mm
Features: for extreme conditions, sterilizable, autoclavable
Electrodes are consumption objects. 
Lifetime under careful treatment: > 2 years; warranty: 12 months

 

 

GR 175 S7
Measuring range: ± 2000 mV, 0 ... 80 °C
Electrolyte: gel electrolyte
Cable: withoutScope of supply: ORP electrode, Manual
Note: cable GEAK-2S7-BNC or GEAK-5S7-BNC is needed for connection S7

 

 

GE 108 S7
Measuring range: 0-14 pH, 0-80 °C, pressure resistant up to 6 bar
Electrolyte: 3mol/l KCL, permanent gel electrolyte,  refill not necessary
Miscellaneous: 2m cable
Scope of delivery: pH-electrode, instruction manual
Application: environmental analysis, swimming pool, aquarium, water treatment, etc.

 

 

GE 108 Cinch
Measuring range: 0-14 pH, 0-80 °C, pressure resistant up to 6 bar
Electrolyte: 3mol/l KCL, permanent gel electrolyte,  refill not necessary
Miscellaneous: 2m cable, with cinch plug, with thread PG13.5
Scope of delivery: pH-electrode, instruction manual
Application: environmental analysis, swimming pool, aquarium, water treatment, etc.

Accessories (optional):
GWA1Z - Thread Adapter, 1"

 

 

GE 108 BNC, pH-electrode

Measuring range: 0-14 pH, 0-80 °C, pressure resistant up to 6 bar
Electrolyte: 3mol/l KCL, permanent gel electrolyte,  refill not necessary
Miscellaneous: 2m cable, with BNC-plug, with thread PG13.5
Scope of delivery: pH-electrode, instruction manual
Application: environmental analysis, swimming pool, aquarium, water treatment, etc.

Accessories (optional):
GWA1Z - Thread Adapter, 1"

 

 

GAK 1400

Consisting of:

Buffer capsules: GPH 4.0 (5x), GPH 7.0 (5x) and GPH 10.0 (5x)

Plastic vials: GPF100 (3x)

Refill electrolyte: 3mol KCL-electrolyte KCL3M (1x)

Cleansing solution: GRL100 (pepsin) (1x)

 

 

GRMU 2000 MP
Measuring Range:            -2000...+2000mV
                                               or limited measuring range according to customer request
Accuracy (25°C):               0,2% FS 
Output Signal:                    4...20 mA (2-wire), standard
                                               0-10V (3-Leiter), gegen Aufpreis
Electical Isolation:             input electricalla isolated
Power Supply:                   12...30 VDC  (with option 0-10V: 18...30VDC)
Working Temperature:    0...+50°C (elektronic)

Electrode:                           GE 105 (not in scope of supply)
Input Resistance:             10¹² Ohm
Connecting Socket:         cinch socket (standard), BNC socket (optional)

On-wall Display:                10mm high, 4-digit LCD display (optional)

Housing:                             ABS (IP65), except electrode socket
Dimensions:                      82 x 80 x 55mm (W x H x D)

 > Options (4) 

 

PG 13,5
The adapter can be mounted on each pH- or redox-electrode
External Screw Thread: PG 13,5

 

 

GTT-05-0150
Measuring range: -220...+1150 °C
Response time: t90 = ca. 3 sec.



Technical details: flexible jacket material (Inconel), electrically isolated, class 1, DIN-plug

 

 

GTT-05-0250
Measuring range: -220...+1150 °C
Response time: t90 = ca. 3 sec.



Technical details: flexible jacket material (Inconel), electrically isolated, class 1, DIN-plug

 

 

GTT-05-0500
Measuring range: -220...+1150 °C
Response time: t90 = ca. 3 sec.



Technical details: flexible jacket material (Inconel), electrically isolated, class 1, DIN-plug

 

 

GTT-05-1000
Measuring range: -220...+1150 °C
Response time: t90 = ca. 3 sec.



Technical details: flexible jacket material (Inconel), electrically isolated, class 1, DIN-plug

 

 

GTT-05-1500
Measuring range: -220...+1150 °C
Response time: t90 = ca. 3 sec.



Technical details: flexible jacket material (Inconel), electrically isolated, class 1, DIN-plug

 

 

GMH 3511
Specification:
Measuring ranges:
   Temperature: -5.0 ... +150.0 °C or 23.0 ... +302.0 °F
   pH: 0.00 ... 14.00 pH
   Redox (ORP): -1999 ... +2000 mV
                        Based on hydrogen system: -1792 ... +2207 mVH (DIN38404)
Accuracy (device): ±1 digit at nominal temperature = 25 °C
   Temperature: ±0.2 °C (at range -5 ... 100 °C)
   pH: ±0.01 pH
   Redox (ORP): ±0.1% FS (mV or mVH)
Dimensions: 142 x 71 x 26 mm (H x W x D) 
Weight: approx. 170 g
Scope of supply: Device, battery, manual

 

 

GE 114-BNC
Measuring range: 0 ... 14 pH, 0 ... 60 °C
Conductivity: > 200 µS / cm
Cable: 1 m 
Electrolyte: gel electrolyte
Diaphragm: 1 x pellon
Electrode shaft: epoxide, Ø 12 mm x 120 mm
Features: Low-cost, low-maintenance
Electrodes are consumption objects. 
Lifetime under careful treatment: > 2 years; warranty: 12 months

 

 

CaCl
mixing ratio soil: solution is 1:2,5 (volume)
package size: 1 liter

 

 

GMH 3551

Measuring range Temperature: -5.0 ... +150.0 °C or 23.0 ... +302.0 °F
Measuring range pH: 0.00 ... 14.00 pH
Measuring range redox (ORP): -1999 ... 2000 mV
Measuring range rH: 0.0 ... 70.0 rH
Sensor connection temperature: 2 x 4 mm banana socket for Pt1000, 2-wire
Sensor connection pH/redox: BNC socket
Automatic temperature compensation:
In operation mode „pH" an automatic temperature compensation (ATC) is possible in the range 0 ... 105 °C if a temperature probe is connected. Otherwise a manual input of temperature is possible.

pH Calibration: 
The buffer type is automatically detected. The temperature dependency of the buffer is automatically compensated.

ORP measurement (redox):
There are 2 choices:
„mV": standard ORP or mV measurement
„mVH": temp. compensated conversion to hydrogen system acc. to DIN38404 part 6, table 1 based on the standard ORP electrode (e.g. GE105 with Ag/AgCl system and 3 mol KCl) used.

rH Measurement: 
Calculation of the rH value by means of a ORP measurement and by manually entering the pH-value. The pH-value may also be taken from a previous pH measurement.

Functions: Min / max value memory, Hold function, Automatic off function, battery change indicator

Real-time clock

Analog output: 0 - 1 V, freely scalable, connection via 3-pole jack socket Ø 3.5 mm, resolution 13 bit, accuracy 0.05 % at nominal temperature
Data logger: cyclic 10.000 data sets, single value: 1.000 data sets (with measuring point input, 40 adjustable measuring point texts or measuring point numbers)
Min-/Max-Alarm: continuous checking of alarm boundaries for pH
Scope of supply: device, battery, manual
Note: w/o accessories, please order pH-probe and calibration accessories (i.e. GAK1400) separately 

 

 

GMH 5530
Features:

• Waterproof (device and plug connections)
• Serial Interface and analog output
• GLP-features (Good Laboratory Practice)
• Silicone protection cover
• Big dual display
• Background lightning
• Hight resolution (0,001 pH / 0,1 mV)
• incl. calibration protocol

Anwendung:

• Waters measuring, fishkeeping, aquafarming
• Drinking water monitoring, process control, soil measuring
• Food production and monitoring
• Laboratory: Medicine, pharmaceutics, chemistry
• Quality management

Technical Data:

Measuring ranges:    pH      Redox / mV    Temperature    rH	-2,000 ... 16,000 pH -2000 ... 2000 mV -1000,0 ... 1000,0 mV -5,0 ... 150,0 °C 0,0 ... 70,0 rH
Connections:
pH / Redox	BNC-female connector, compatible to standard BNC-plugs and waterproof BNC-plugs, additional banana-jack (4 mm) for separate reference electrode input resistance: 1012 Ohm
Temperature	2 banana-jacks (4 mm) for temperature probes (Pt1000 or NTC 10K)
Interface /    Supply	4-pole bayonet female connector for serial interface and supply  (with accessory USB 5100)
Display:	two 4½-digit 7-segment display (15 mm und 12 mm)

 

 

GMH 5550
Features:

• Waterproof (device and plug connections)
• Analog output
• data logger
• Serial Interface and analog output
• GLP-features (Good Laboratory Practice)
• Silicone protection cover
• Big dual display
• Background lightning
• Hight resolution (0,001 pH / 0,1 mV)
• incl. calibration protocol

Anwendung:

• Waters measuring, fishkeeping, aquafarming
• Drinking water monitoring, process control, soil measuring
• Food production and monitoring
• Laboratory: Medicine, pharmaceutics, chemistry
• Quality management

Technical Data:

Measuring ranges:    pH      Redox / mV    Temperature    rH	-2,000 ... 16,000 pH -2000 ... 2000 mV -1000,0 ... 1000,0 mV -5,0 ... 150,0 °C 0,0 ... 70,0 rH
Connections:
pH / Redox	BNC-female connector, compatible to standard BNC-plugs and  waterproof BNC-plugs, additional banana-jack (4 mm) for separate reference electrode input resistance: 1012 Ohm
Temperature	2 banana-jacks (4 mm) for temperature probes (Pt1000 or NTC 10K)
Interface /    Supply	4-pole bayonet female connector for serial interface and supply  (with accessory USB 5100)
Display:	two 4½-digit 7-segment display (15 mm und 12 mm)
Analog output	0 - 1 V freely adjustable
Data logger	with measuring point input Recording interval: 1 s ... 1 h Recording period: 416 days at interval 1 h  Value memory: cyclic: 10000 data sets                        singular: 1000 data sets
Min-/max-Alarm	Permanent monitoring of alarm boundaries 3 alarm conditions (off, on, no sound)

 

 

GE 120 Cinch
Measuring range: 0-14 pH, 0-80 °C, not pressure resistant
Miscellaneous: 1m cable, with cinch plug
Scope of supply: pH-electrode incl. Knife Kit, operating instructions
Application: for goods and foods, etc.

 

 

GE 120 BNC
Measuring range: 0-14 pH, 0-80 °C, not pressure resistant
Miscellaneous: 1m cable, with BNC-plug
Scope of supply: pH-electrode incl. Knife Kit, operating instructions
Application: for goods and foods, etc.

 

 

GE 151 Cinch
Measuring range: 0-14 pH, -5...+80 °C, not pressure resistant
Electrolyte: 3mol/l KCL, refillable
Miscellaneous: 1m cable, with Cinch-plug
Scope of supply: pH-electrode, operating instructions
Application: electroplating, partly for paints and varnishes, alkali resistant

 

 

GE 151 BNC
Measuring range: 0-14 pH, -5...+80 °C, not pressure resistant
Electrolyte: 3mol/l KCL, refillable
Miscellaneous: 1m cable, with BNC-plug
Scope of supply: pH-electrode, operating instructions
Application: electroplating, partly for paints and varnishes, alkali resistant

 

 

GMH 55 ES
Scope of Supply:  
1 pcs  GE 100 BNC, pH electrode mit BNC connector
1 pcs  GTF 55 B, Pt1000 temperature probe, 2-wire
1 pcs  GKK 3500, plastic case
1 pcs  GAK 1400, working and calibration set

 

 

GTF 55 B

Sensor element:	Pt1000, 2-wire
Measuring range:	-50 ... +150 °C
Dimensions:
Probe lenght:	150 mm
Probe Ø :	3 mm
Cable lenght:	1 m (PVC)
Connection:	2 banana plug

 

 

PHL 10
Buffer solution
pH 10,01 at 25 °C
250 ml dosing bottle / dosage volume 20 ml and 25 ml

 

 

PHL 4
Buffer solution
pH 4,01 at 25 °C
250 ml dosing bottle / dosage volume 20 ml and 25 ml

 

 

PHL 7
Buffer solution
pH 7,00 at 25 °C
250 ml dosing bottle / dosage volume 20 ml and 25 ml

 

 

GE 125
Measuring range: 0-14 pH, 0-70 °C, not pressure resistant
Electrolyte: Gel-electrolyte
Miscellaneous: 2m cable, with BNC-plug and 4 mm Banana
Scope of supply: pH-electrode, instruction manual
Application: environmental analysis, aquarium, water treatment, Food & Beverage, etc.

 

 

GPH 114 GL
Specification:

Measuring range: 0.00 ... 14.00 pH with standard pH-electrode type GE 114
Resolution: 0.01 pH
Accuracy:  ± 0.02 pH ± 1 digit (at nominal temperature 25 °C)
Connection: BNC BajonettEMC: The device corresponds to the essential protection ratings established in the Regulations of the Council for the Approximation of Legislation for the member countries regarding electromagnetic compatibility (2004/108/EG), additional fault: <1 br="">Scope of supply: Device, battery, manual

 

 

GEAK-2S7-BNC
Length: 2 m

 

 

GEAK-5S7-BNC
length: 5 m

 

 

ISO-WPP10
Certificate of calibration with 10 points from 1.09 pH ... 12.75 pH

 

 

ISO-WPP3
Certificate of calibration with 3 points: 4.00 pH, 6.87 pH, 9.18 pH

 

 

GE 173 S7

Measuring range: 0 ... 14 pH; 0 ... 80 °C
Electrolyte: gel electrolyte
Cable: 1 m 
Features: for process chemistry, bio-chemistry

 

 

GE 104 BNC

 

 

Kabel-BNCM/BNCF
Extension cable for electrodes with BNC connector, Cable length: 3 m

 

 

GR 175 BNC
Measuring range: ± 2000 mV, 0 ... 80 °C
Electrolyte: gel electrolyte
Cable: 1 m
Scope of supply: ORP electrode, manual

 

 

GE 104 Cinch

 

 

GMH 3531
Measuring range Temperature: -5.0 ... +150.0 °C or 23.0 ... +302.0 °FMeasuring range pH: 0.00 ... 14.00 pH
Measuring range redox (ORP): -1999 ... 2000 mV
Measuring range rH: 0.0 ... 70.0 rH
Sensor connection temperature: 2 x 4 mm banana socket for Pt1000, 2-wireSensor connection pH/redox: BNC socket
automatic temperature compensation:In operation mode „pH“ an automatic temperature compensation (ATC) is possible in the range 0 ... 105 °C if a temperature probe is connected. Otherwise a manual input of temperature is possible.
pH calibration: The buffer type is automatically detected. The temperature dependency of the buffer is automatically compensated.
ORP measurement (redox):There are 2 choices:
„mV": standard ORP or mV measurement
„mVH": temp. compensated conversion to hydrogen system acc. to DIN38404 part 6, table 1 based on the standard ORP electrode (e.g. GE105 with Ag/AgCl system and 3 mol KCl) used.
rH measurement: Calculation of the rH value by means of a ORP measurement and by manually entering the pH-value. The pH-value may also be taken from a previous pH measurement.

Functions: Min / max value memory, Hold function, Automatic off function, battery change indicatorScope of supply: device, battery, manual
Note: w/o accessories, please order pH-probe and calibration accessories (i.e. GAK1400) separately

 

 

GE 173 Cinch

Measuring range: 0 ... 14 pH; 0 ... 80 °C
Electrolyte: gel electrolyteCable: 1 m 
Features: for process chemistry, bio-chemistry

 

 

GE 173 BNC

Measuring range: 0 ... 14 pH; 0 ... 80 °C
Electrolyte: gel electrolyte
Cable: 1 m 
Features: for process chemistry, bio-chemistry

 

 

G 1500
Specifications:
Measuring range: 0.00 … 14.00 pH
Resolution: 0.01 pH
Accuracy (device): ±0.02 pH ±1 digit (at nominal temperature 25 °C)
Sensors / Connection: pH-electrode via BNC socket, GE 114 WD (standard)
Scope of supply: Device, pH-electrode, Calibration protocoll, 2 x battery, manual

 

 

GMH 3511-Set
Applications:• waters, aquaristics, fish farming
• drinking water and process monitoring
• soil measurements
• food production and control
• swimming pools
• education

Specifications:

 

 

GWA 11 PG
incl. sealing and PG11 counter nut
material: polyamide, fiber glass reinforced
O-ring: NBR 
temperature range: -10 ... +100 °C

 

 

GWA1Z
Adapter from PG 13.5 to G1", plastic

 

 

GPH 4,0 / 5

 

 

KCL 3 M
Plastic vial, for refill or storage (filled in the protective cap) of electrodes with 3mol KCL-electrolyte

 

 

GPH 4,0 / 10

 

 

GRL 100

For cleaning of pH-electrodes or redox-electrodes
To use for: organic or inorganic contamination like oil, grease, shortening, lime etc.

 

 

GPH 7,0 / 5

 

 

GRP 100
Note: Already included in the scope of supply of the redox electrode GE 105

 

 

GPH 7,0 / 10

 

 

GPH 10,0 / 5

 

 

VD120

 

 

GPH 10,0 / 10

 

 

GPF 100

 

 

GPH 12,0 / 5

 

 

GPH 12,0 / 10

 

 

GAD 1 CINCH
For electrodes with cinch-plug to instruments with BNC-socket

 

 

GAD 1 BNC
For electrodes with BNC-plug to instruments with cinch-socket

 

 

GR 105-BNC
Measuring range: ± 2000 mV, 0 ... 80 °C
Conductivity: > 100 uS / cm
Temperature measurement: no
Water-proof: no
Pressure resistant: no
Cable: 1 m
Electrolyte: 3 mol/l KCL
Diaphragm: 2 x ceramic
Metal electrode: Ø 5 mm Platin dome
Electrode shaft: Tyril, Ø 12 mm x 120 mm
Minimal depth of immersion: 15 mm
Scope of supply: ORP electrode, manual

 

 

GR 105-Cinch
Measuring range: ± 2000 mV, 0 ... 80 °C
Conductivity: > 100 uS / cm
Temperature measurement: no
Water-proof: no
Pressure resistant: no
Cable: 1 m
Electrolyte: 3 mol/l KCL
Diaphragm: 2 x ceramic
Metal electrode: Ø 5 mm Platin dome
Electrode shaft: Tyril, Ø 12 mm x 120 mm
Minimal depth of immersion: 15 mm
Scope of supply: ORP electrode, manual

 

 

GE 100 Cinch
Measuring range: 0-14 pH, 0-80 °C, not pressure resistant
Electrolyte: 3mol/l KCL, refillable
Miscellaneous: 1m cable, with cinch plug
Scope of supply: pH-electrode, operating instructions
Application: environmental analysis, swimming pool, aquarium, water treatment etc.

 

 

GE 100 BNC, standard pH-electrode

Measuring range: 0-14 pH, 0-80 °C, not pressure resistant
Electrolyte: 3mol/l KCL, refillable
Miscellaneous: 1m cable, with cinch plug
Scope of supply: pH-electrode, operating instructions
Application: environmental analysis, swimming pool, aquarium, water treatment etc.

 

 

GE 101 Cinch
Measuring range: 2-11 pH, 0-60 °C, not pressure resistant
Electrolyte: 3mol/l KCL, refillable
Miscellaneous: 1m cable, with cinch plug
Scope of supply: pH-electrode, instruction manual
Application: foods, suspensions, ground survey, etc.

Accessories (optional):
VD 120 - Pricker

 

 

GE 117
Measuring range: 0-14 pH, 0-80 °C, pressure resistant up to 6 bar
Electrolyte: gel, not refillable
Miscellaneous: 2m cable, with BNC plug (pH) and banana plug (temperature)
Specials: integrated temperature sensor, with thread PG13.5
Scope of delivery: pH-electrode, operating instructions
Application: environmental analysis, swimming pool, aquarium, water treatment, etc.

 

 

GE 101 BNC
Measuring range: 2-11 pH, 0-60 °C, not pressure resistant
Electrolyte: 3mol/l KCL, refillable
Miscellaneous: 1m cable, with BNC-plug
Scope of supply: pH-electrode, instruction manual
Application: foods, suspensions, ground survey, etc.

Accessories (optional):
VD 120 - Pricker

 

 

GE 109, pH-electrode with integrated Pt100

Measuring range: 0-14 pH
Temperature range: 0-60 °C
Pressure resistance:up to 6 bar
Electrolyte: Continuous gel-electroly
Connection: 2m cable, with BNC plug (pH) and Mini-DIN-plug (temperature)
Specials: integrated temperature sensor, for automatic temperature compensation
Scope of supply pH-electrode, instruction manual
Application: environmental analysis, swimming pool, aquarium, water treatment, etc.